MADRIX PLEXUS User Manual (English)
131
Updating The Firmware
1.4.2
Note
It is recommended to always use the latest firmware and drivers.
How To Check The Firmware Version
On The Device
On the device, navigate to the menu 'Information' > 'Version'. The
current version is 1.09.7024
In MADRIX
1) Please connect your PLEXUS to your PC using USB.
2) In MADRIX, go to the menu 'Tools' > 'PLEXUS Configuration' (or 'Ctrl+Alt+P').
3) When the device is recognized by MADRIX already, a message may be shown saying that the
firmware version is not up-to-date.
© 2017 inoage GmbH