MADRIX PLEXUS Handbuch Seite 17

Monitor DMX 2
Test Sending
© 2017 inoage GmbH
You may change the settings and the functionality. Press and hold 'OK'
for 2 seconds.
'Show As' - Choose the overall display modus (Graphic, Table, Channel).
'Show Values As' - Choose the display modus of values (Hexadecimal,
Decimal, Percent). Decimal cannot be displayed in Table mode.
Use or to scroll in Table mode.
Use or to change the DMX channel in Graphic and Channel Mode. In
Graphic mode, the individual channel will be shown in the upper right
corner in addition to the graphics.
Navigate to the menu 'Tools' > 'Monitor DMX 2'.
Use this menu to monitor and check DMX data output or input of the
second XLR port (DMX 2).
You may change the settings and the functionality. Press and hold 'OK'
for 2 seconds.
'Show As' - Choose the overall display modus (Graphic, Table, Channel).
'Show Values As' - Choose the display modus of values (Hexadecimal,
Decimal, Percent). Decimal cannot be displayed in Table mode.
Use or to scroll in Table mode.
Use or to change the DMX channel in Graphic and Channel Mode. In
Graphic mode, the individual channel will be shown in the upper right
corner in addition to the graphics.
Navigate to the menu 'Tools' > 'Test Sending'.
Use this menu to send DMX values for testing purposes.
Press or to change the DMX channel.
Minimum channel is 1. Maximum channel is 512.
Press or to change the DMX value that is being sent.
Minimum value is 0. Maximum value is 255.
MADRIX PLEXUS User Manual (English) 17