Art-Net (Output) - MADRIX PLEXUS Handbuch

62 MADRIX 3 PLEXUS User Manual / Handbuch
1.3.2.3

Art-Net (Output)

Introduction
The Art-Net protocol is a widely known standard to transfer DMX512 over Ethernet (network).
Usage
This chapter describes how Art-Net can be used to connect your PC that runs the MADRIX
software to the MADRIX PLEXUS via network cables to output DMX data. DMX data is then sent to
the device over Ethernet/network.
(Your LED fixtures, LED controllers, or LED drivers would be connected to the XLR ports of the
PLEXUS device.)
Using MADRIX
Please make sure to install the MADRIX software first.
For more information about the installation process, see the MADRIX PLEXUS Quick Start Guide or
the MADRIX Help And Manual.
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX to your computer using the network connection. Your device
can be powered via the USB port or by using the external power supply.
© 2017 inoage GmbH