LCD Graphics Display (PLEXUS Menus)
1.2.1
Introduction
This chapter describes the numerous menus provided on the device as well as further information
regarding the LCD graphics display.
Icons
An SD card is inserted into the device.
No SD card is inserted into the device.
The values in the menu are editable. You can change the settings.
This icon starts to blink when you are editing the values.
Shows that Freeze is activated.
This icon is blinking.
Others
Blinking/
'Highlight Device' is active in the Device Manager of MADRIX.
Flashing
(Flashing can be stopped by pressing a button on the PLEXUS device.)
Display
How To
How To Navigate Through Menus
Press 'OK' to open the menu bar. Then, navigate with the help of the arrow buttons. When you
have selected your target menu, press 'OK' to enter it.
How To Edit Values
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English)
9