Seite 1
PLEXUS USB 2.0 DMX512 Interface / Art-Net Node Live Or Stand-Alone Including LED Lighting Control Software MADRIX ®...
Seite 3
Edition, Last Update: January 2016 Thank You For Purchasing MADRIX PLEXUS ® Please read this guide carefully and thoroughly before using MADRIX ® PLEXUS. Make sure that you fully understand all information. This MADRIX PLEXUS Quick Start Guide and the MADRIX PLEXUS User ®...
Neutrik AG. Art-Net™ - Designed by and Copyright Artistic Licence Holdings Ltd. SD™, SDHC™ are trademarks. All other products mentioned herein may be trademarks of their respective companies. MADRIX ® is a registered trademark of inoage GmbH.
Seite 5
Safety Instructions And Limited Warranty Two years of limited manufacturer’s warranty are granted to the purchaser of this product. Warranty applies to constructional fault, material defect, or incorrect assembly the manufacturer has caused or is to be held responsible for. Warranty will be void if the interface is opened, modified, damaged through inappropriate handling and wrong usage, damaged through electric current (electricity), or damaged through any other cause.
CE And RoHS Declaration Of Conformity RoHS The device complies with the requirements set forth in the council Directive of the law of the c o m p l i a n t Member States relating to electromagnetic compatibility (2004/108/EC), the Low Voltage Directive (2006/95/EC), and the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (2011/65/EU) (RoHS).
Power Supply MADRIX PLEXUS can be powered in two ways. You can either use the provided ® external power supply or you can connect the device directly to a free USB 2.0 port of your computer.
Step 4) Depending on the display rotation of the device, press UP to perform the reset. How To Open The Metal Lid MADRIX PLEXUS is equipped with a metal lid at the top. It covers the SD card ® slot, the extension port, and the Kensington Security Slot. Opening The Lid Step 1) Hold the PLEXUS at the left and right side with both hands.
Seite 9
PLEXUS features two 5-pin, female XLR connectors. ® Please use XLR adapters if necessary! Monitoring DMX Output Or DMX Input You can monitor incoming or outgoing DMX data in the PLEXUS menus ‘Tools’ à ‘Monitor DMX 1’ and ‘Tools’ à ‘Monitor D MX 2’.
Seite 10
(sold separately). Attach the cable around an immovable object, insert the compatible connector into the Kensington Security Slot of MADRIX ® PLEXUS and secure the lock according to the instructions provided with the lock, for example by turning the key or the combination lock. LCD Graphics Display How To Navigate Through Menus Press ‘OK’...
Seite 11
No SD card is inserted into the device. The values in this menu are editable. You can change the settings. Freeze is activated. The icon is blinking. Important PLEXUS Menus Status Navigate to the menu ‘Information’ à ‘Status’. The name of the device,...
Seite 12
Description Of Status LED Codes The following tables describe the status codes of the three status LEDs. COLOR STATUS LED USB/POWER USB/Power not connected. Powered off The device has no power. Connected to the external power supply. green The power is on.
Seite 13
PLEXUS. MADRIX 3.X software updates ® ® are free of charge for the purchaser of this product. The latest MADRIX ® software, including drivers and documentation, and the latest quick start guide as well as the latest MADRIX PLEXUS User Manual are available online at ®...
Seite 14
‘Browse...’ to choose a location and then click ‘Install’. The installation process may take a few minutes. Sixth, when the ‘Installation Complete’ window appears, click ‘Next >’. Seventh, uncheck ‘Run MADRIX’ and then click ‘Finish’ to complete the installation process.
PLEXUS To Your PC ® Now, connect MADRIX PLEXUS to your computer: ® For the USB connection, connect the PLEXUS directly to a free USB 2.0 port using the provided USB cable. Microsoft Windows will install the interface ® ®...
® 1x DMX-OUT, 2x DMX-OUT, or Art-Net is available in Stand-Alone Mode. The PLEXUS uses an SD card to run automatic light shows without the need for a computer. A PC running MADRIX is only necessary to preprogram the shows.
Seite 17
Remote control via DMX means to connect an external DMX unit to one of the XLR ports of the PLEXUS. This port will no longer be available for DMX output. Remote control via Art-Net means to connect an Art-Net unit to the Ethernet port of MADRIX PLEXUS.
Seite 18
PLEXUS to a network. Open a web browser and type in the IP address of your PLEXUS. The IP address can be found and changed in the PLEXUS menu ‘Network’ à ‘IP Address’. Once loaded, the page will show an interactive illustration of your device for remote control.
Digital documentation files are automatically installed with the MADRIX ® software. More information about the device is provided in the MADRIX ® PLEXUS User Manual. More information about the software is provided in the MADRIX Help And Manual (the software user manual). You can also open the ®...
Can I upgrade the MADRIX PLEXUS software license? ® No. One PLEXUS includes the software license for 1024 DMX channels. But you may simply connect more units to access more channels. Can I use a mobile computer instead of a desktop computer? Yes.
Seite 21
PLEXUS – ® Kurzanleitung 4. Edition, Stand: Januar 2016 Vielen Dank, dass Sie sich für das MADRIX PLEXUS entschieden haben! ® Bitte lesen Sie sich diese Kurzanleitung aufmerksam und sorgfältig vor der Erstbenutzung durch. Vergewissern Sie sich, dass Sie alle Informationen verstanden haben.
1x USB-Netzteil 1x USB 2.0-Kabel (zertifiziert) 1x Set an internationalen Netzteilsteckern 1x Kurzanleitung 1x CD-ROM mit MADRIX – Software ® Hinweis: Überprüfen Sie den Verpackungsinhalt und das Gerät nach dem Auspacken. Kontaktieren Sie bitte Ihren Händler, sollte der Inhalt unvollständig...
Sicherheitshinweise und Garantie Der Käufer dieses Produktes erhält zwei Jahre Herstellergarantie auf das Produkt hinsichtlich Konstruktions- und Designfehler, Materialfehler oder fehlerhafte Montage soweit diese durch den Hersteller verursacht wurden oder er diese zu verantworten hat. Die Garantie erlischt sobald das Gerät geöffnet, verändert, modifiziert oder durch unsachgemäße Handhabung, durch Elektrizität oder durch anderweitige Ursachen beschädigt wurde.
Konformitätserklärung für CE und RoHS RoHS Das Gerät entspricht den Anforderungen der Richtlinie der Mitgliedsstaaten über die elektro- c o m p l i a n t magnetische Verträglichkeit (2004/108/EG), der Niederspannungsrichtlinie (LVD) (2006/95/EG) und der Richtlinie zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten (2011/65/EU) (RoHS).
Wichtig: Beachten Sie unbedingt alle Hinweise und Warnungen in dieser Kurzanleitung! Stromversorgung MADRIX PLEXUS kann auf zwei Arten mit Strom versorgt werden. Nutzen Sie ® entweder das externe USB-Netzteil oder verbinden Sie das PLEXUS direkt mit einem freien USB 2.0-Anschluss Ihres Computers.
Tasten gedrückt halten. Schritt 4) Drücken Sie je nach Rotation des Displays auf die Pfeiltaste OBEN. Öffnen der Metallklappe MADRIX PLEXUS ist mit einer soliden Metallklappe am oberen Ende ® des Gerätes ausgestattet. Diese schützt den SD-Kartensteckplatz, den Erweiterungsanschluss sowie den Kensington-Sicherheitsanschluss.
Hinweis: MADRIX PLEXUS hat zwei 5-polige, weibliche XLR-Stecker. ® Bitte nutzen Sie entsprechende Adapter, wenn nötig! Anzeige von DMX-Daten Ein- und ausgehende DMX-Daten können in den PLEXUS-Menüs “Werkzeuge” à “Anzeige DMX 1” und “Werkzeuge” à “Anzeige DMX 2” überprüft werden.
Kensington-Sicherheitsanschluss Der Kensington-Anschluss kann zur Diebstahlsicherung genutzt werden. Mit Hilfe von entsprechendem Zubehör (separat erhältlich) sichert man das PLEXUS an unbeweglichen Objekten. Der Sicherheitsanschluss wird entsprechend der Anleitung, die dem Zubehör beiliegt, verwendet und beispielsweise per Schlüssel oder Zahlenschloss gesichert.
Seite 29
Wie geht die Menü-Auswahl? Drücken Sie “OK”, um das Menü zu öffnen. Nutzen Sie dann die Pfeiltasten zur Navigation. Wenn der gewünschte Menüpunkt ausgewählt ist, drücken Sie “OK”, um ihn zu aktivieren. Wie bearbeitet man Werte? Halten Sie die “OK”-Taste für 2 Sekunden gedrückt. Nutzen Sie die Pfeiltasten, um zu navigieren oder die Werte zu ändern.
Anzeige der Status-LEDs Die folgenden Tabellen beschreiben die Funktionen der drei Status-LEDs. FARBE STATUS-LED USB/POWER (USB/STROM) USB/Power ist nicht angeschlossen. Ausgeschalten Das Gerät hat keinen Strom. Das USB-Netzteil ist angeschlossen. Schwaches grün Das Gerät hat Strom. Kommunikation über USB; Daten werden über USB Grün blinkend gesendet oder empfangen;...
Die USB- bzw. Netzwerktreiber müssen zudem in MADRIX aktiviert sein. ® MADRIX kann für den Live-Modus des PLEXUS, für die Erstellung von PLEXUS- ® Konfigurationen und Standalone-Shows oder zur weiteren Konfiguration des Gerätes verwendet werden. Min. Systemanforderungen für MADRIX ®...
1. Installation der MADRIX -Software ® Legen Sie die mitgelieferte CD in das CD-ROM-Laufwerk Ihres betriebsbereiten Computers ein. Die Installation von MADRIX beginnt daraufhin automatisch. ® Folgen Sie den Anweisungen auf dem Bildschirm, wie im Folgenden beschrieben. VERBINDEN SIE DAS GERÄT BITTE NICHT VOR DER INSTALLATION DER SOFTWARE MIT IHREM PC.
Aktivieren der USB-Treiber in MADRIX ® Aktivierte USB-Treiber sind Voraussetzung für den Live-Modus über USB und die Verbindung vom PC zum Gerät über USB. Öffnen Sie in MADRIX ® Menü “Preferences” à “Options…” à Reiter “Devices USB”. Aktivieren Sie “MADRIX PLEXUS”. Bestätigen Sie mit “OK”.
Der Standalone-Modus ist eine wichtige Funktion des MADRIX PLEXUS. ® 1x oder 2x DMX-Ausgabe oder Art-Net stehen in diesem Modus zur Verfügung. Das PLEXUS nutzt die eingesteckte SD-Karte, um automatisch Lichtshows ohne Computer abzuspielen. Ein PC mit installierter MADRIX -Software wird zur ®...
Bestätigen Sie mit “Apply”. Konfigurieren Sie danach die Fernsteuerung unter “Preferences” à “Device Manager...” à Reiter “DMX Input”. Selektieren Sie einen Eintrag in der Liste (“Universe” 1 bis 8), wählen Sie das PLEXUS als “DMX-IN Device” aus und schalten Sie “Remote” ein. Wählen Sie jetzt eines der Protokolle in der Sektion “Remote Control”.
Geräte zur Fern- steuerung angeschlossen werden. Extension Rufen Sie in MADRIX das Menü ® “Tools” à “PLEXUS Configuration…” à Reiter “Extension Ports” auf, um die 10 Ports für die jeweilige PLEXUS-Konfiguration individuell zu konfigurieren. Belegung Optionen Masse Port 1...
Bedientasten zur Steuerung Während der Standalone-Wiedergabe können die fünf Bedientasten auf dem Gerät zur manuellen Steuerung genutzt werden. Öffnen Sie dazu das PLEXUS- Menü “Standalone” à “Wiedergabe”. Die Pfeiltasten LINKS bzw. RECHTS lassen das Gerät jeweils eine Szene zurück bzw. vor springen.
PLEXUS zu verwenden? ® Ja. Mehrere Geräte können problemlos für größere Projekte genutzt werden. Kann ich die PLEXUS-Softwarelizenz erweitern? Nein. Ein PLEXUS schaltet 1024 DMX-Kanäle in MADRIX frei. Jedoch können ® weitere Geräte – und somit weitere Kanäle – zusätzlich angeschlossen werden.