MADRIX PLEXUS Handbuch Seite 82

82 MADRIX 3 PLEXUS User Manual / Handbuch
Options
Please configure the following options before recording.
'Synchronize With Cue List' will create a record according to your preprogrammed Cue List. If
this option is activated, the Cue List will automatically start to play when the Recording is started
(by clicking on the button 'Start').
'Start With Cue' allows you to specify which Cue List entry should be used first, when you wish
to use the function 'Synchronize With Cue List'.
'Frame Time (ms)' defines the frame rate of the record.
Please adjust the frame time to the requirements of your LED fixtures and devices!
Please note:
A frame rate (FPS) that is too high might cause problems. Those can be visual problems on your
LEDs, for example.
For the MADRIX PLEXUS a maximum frame rate of 40 FPS is recommended. Otherwise, PLEXUS
devices may drop single frames to maintain the timing. PLEXUS devices are likely to drop frames
in order to maintain the timing, when all 512 DMX channels of a DMX universe are used. If your
DMX universes contain less than 512 channels (324 DMX channels, for example) this behavior is
less likely.
© 2017 inoage GmbH