MADRIX PLEXUS Handbuch Seite 124

124 MADRIX 3 PLEXUS User Manual / Handbuch
Changed SD card playback behavior during Live Mode. If a configured SD card is inserted into
the device, SD card playback stops when the device receives live input data for Live Mode. SD
card playback starts again, once live data is not received anymore and if 'AutoPlay' was
configured in the PLEXUS Configuration.
Version 1.02.3230
Released with: MADRIX 2.13b - October 2011
Requires PLEXUS driver 6.0.512.0
Fixed that Scene 1 was played when pressing Next in the Playback menu after a restart, instead
of Scene 2.
Fixed a problem with numbering and jumps in index values in the list of the Scene menu.
Fixed a problem with the list of the Timers menu displaying an incorrect weekday when selecting
Weekly.
Fixed a problem with reading a PLEXUS Configuration correctly in Stand-Alone Mode after
restarting the computer and losing power over USB as a result.
Fixed that the DMX Tester (Test Sending menu) and some of its settings were not initialized
correctly.
Fixed that SD card formatting could fail after a Factory Default Reset.
Fixed that Speed could not be set up correctly when using the PLEXUS Configuration Fenster
and the USB connection.
Improved GUI refreshing of the display for intense processing tasks, such as uploading and
downloading.
Improved Highlight Mode: The LCD Graphics Display of the selected device will flash when
Highlight Device is activated in the Device Manager of MADRIX.
Added more status messages to the Status menu (i.e. in case of uploading, downloading, etc.).
© 2017 inoage GmbH