MADRIX PLEXUS Handbuch Seite 41

Intensity
Group 6
Intensity
Group 7
Intensity
Group 8
Intensity Groups
Eight Intensity groups are shown in the above list, four of them are available for active use with
MADRIX. This is a feature mainly available for Direct Remote Control.
An Intensity Group includes all color values (0 to 255) for a single color. Intensity Group 1 controls
the color channel Red. Intensity Group 2 controls the color channel Green. Intensity Group 3
controls the color channel Blue. Intensity Group 4 controls the color channel White.
Example: You may wish to exclude Red color values from your visual effects via Remote Control.
Using the Remote Command 13 (Intensity Group 1), you can choose to reduce the Red color
channel to 0, for example. In this way, the PLEXUS will continue to output your visual effects, but
completely without Red.
You can also change settings for the Intensity groups in the menu 'Stand-Alone' > 'Intensity/
Speed'.
If you choose to control Intensity Groups for your Master interface (Master-Slave
Synchronization), Slave interfaces can have their Intensity Groups controlled as well, when this
option is selected in the Sync menu ('Network' > 'Sync').
© 2017 inoage GmbH
(Yes) 18 -
(Yes) 19 -
(Yes) 20 -
MADRIX PLEXUS User Manual (English)
defines a mask. When creating DMX Data files
(*.dxd) in MADRIX, this channel is not defined.
defines a mask. When creating DMX Data files
(*.dxd) in MADRIX, this channel is not defined.
defines a mask. When creating DMX Data files
(*.dxd) in MADRIX, this channel is not defined.
41