MADRIX PLEXUS Handbuch Seite 136

136 MADRIX 3 PLEXUS User Manual / Handbuch
Important Note
If new drivers and a new firmware are available for the MADRIX PLEXUS, please always
update the firmware first and then the drivers!
MADRIX PLEXUS Updater does not work when MADRIX is running. Please close MADRIX and
restart MADRIX PLEXUS Updater.
Hardware Model/Type
The manufacturer may update the hardware design of the device for new units. Please note the
following:
Hardware model V1.6 ('Model: PLEXUS V1.6') can be updated using firmware version 1.07.4369
or higher without any problems.
Hardware model V1.7 ('Model: PLEXUS V1.7') requires at least firmware version 1.06.4260 or
higher! Please do not use a previous version.
Where To Find The MADRIX PLEXUS Updater
The MADRIX PLEXUS Updater is included in the MADRIX Installer. After installing MADRIX, you can
find a link to the MADRIX PLEXUS Updater in the Windows Start menu:
'Start' > 'All Programs' > 'MADRIX 3' > 'Tools' > 'MADRIX PLEXUS Updater'
The original, executable program can be found in the MADRIX installation directory: C:\Program
Files (x86)\MADRIX3
© 2017 inoage GmbH