MADRIX PLEXUS Handbuch Seite 92

92 MADRIX 3 PLEXUS User Manual / Handbuch
Please note:
Generate DMX Data files (*.dxd) for every single effect (each of your recordings).
You may create several, different DMX Data files (*.dxd) from one MADRIX Record file (*.mrec).
Your MADRIX Record file (*.mrec) will not be deleted when a new DMX Data files (*.dxd) is
generated.
When using multiple devices at the same time in one installation, you will need multiple DMX Data
files (*.dxd). When using the button 'Generate', all list entries in the tab 'PLEXUS Conversion' will
be used to automatically create multiple DMX Data files.
Warnings:
When generating *.dxd files, you may encounter two messages.
1) As described above, you need to configure your virtual LED matrix (Matrix Size) correctly,
before generating DMX Data files. This message box is a reminder to check if your Patch settings
are configured correctly. Click 'Yes' if you would like to proceed with your current settings. Click
'No' if you would like to change your settings.
2) As described above, the maximum recommended frame rate for the MADRIX PLEXUS is 40 FPS
(a frame time of 25ms). This message box is a reminder to check if your frame rate settings are
configured correctly. Click 'Yes' if you would like to continue with your current settings. Click 'No' if
you would like to change your settings.
© 2017 inoage GmbH