106
MADRIX 3 PLEXUS User Manual / Handbuch
1.3.3.5
Step 7), Step 8) Upload And Activation
Step 7) Uploading A Stand-Alone Show Onto The SD Card
Please go to the menu 'Tools' > 'PLEXUS Configuration...' (or 'Ctrl+Alt+P') to call up the PLEXUS
Configuration window.
Click
to find your connected PLEXUS.
You can either
A) directly save your Stand-Alone Show on an SD card
Please make sure to use an empty SD card! First, select your Configuration.
Second, click 'Export'. In the third step, choose your target source.
Or
B) you can save your Stand-Alone Show on the SD card that is inserted into your MADRIX
PLEXUS.
Your PLEXUS must be connected via USB or via Ethernet (network).
First, select your MADRIX PLEXUS. Second, select your PLEXUS Configuration.
Third, click 'Upload' and the PLEXUS Show will be saved on the SD card of your device.
Step 8) Activating Stand-Alone Mode
Last but not least, you will have to activate Stand-Alone Mode on your MADRIX PLEXUS.
A) Activate Stand-Alone Mode manually on the device using the menu (LCD graphics display) and
the 5 control buttons (menu 'Stand-Alone' > 'Playback').
© 2017 inoage GmbH