Configuring Dmx Output In Madrix - MADRIX PLEXUS Handbuch

66 MADRIX 3 PLEXUS User Manual / Handbuch
Activate 'Enable' in the upper right corner. The checkbox will light up green, when
activated.
Click this button to let MADRIX automatically find your device.
Your device will be shown in the list.
(The entry 'ArtNet Remote' will be created automatically when activating Art-Net and can be
ignored at this stage.)
Art-Net is now activated. But you will still need to configure DMX output, as described below.

Configuring DMX Output In MADRIX

© 2017 inoage GmbH