Adds a new DMX Data file (*.dxd).
Removes an existing DMX Data file from the PLEXUS Configuration.
'#'
shows the indexing number of the Data File. This value cannot be changed.
'In Use'
shows how often the Data File is used in your PLEXUS Configuration by Scenes.
This value cannot be changed.
'File'
shows the exact name of the record file. This value cannot be changed.
'Name'
shows the general label of the file. This value cannot be changed.
'Duration'
shows the length of the record. This value cannot be changed.
'FPS'
shows the frames per second of the record file. This value cannot be changed.
'Size'
shows the file size in Bytes. This value cannot be changed.
Continue with Step 7) and Step 8)
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English)
105