MADRIX PLEXUS Handbuch Seite 13

© 2017 inoage GmbH
Press to decrease Speed. Press
Minimum Speed is 1%. Maximum Speed is 1000%. The default value is
100%.
Additionally, you can change the settings for the 8 Intensity Groups.
Each Intensity Group is represented by a rectangle. At full intensity, the
rectangle will be completely white. At zero intensity, the rectangle will
be completely black.
For more information about Intensity Groups, see
You may change the settings in this menu, on the device
Values).
Use or to navigate.
Press to reduce the Intensity for an Intensity Group (IG 1 - IG 8).
Press to increase Intensity.
Minimum Intensity is 0%. Maximum Intensity is 100%. The default value
is 100%.
Please note: Intensity, Speed, and Intensity Groups are permanent
settings, which the device will remember. They will remain even after a
restart of the device.
Please note: You may reset to default values (100%) by pressing ' and
' or ' and ' at the same time for 2 seconds.
You can also configure the settings in the PLEXUS Configuration window
in MADRIX. For more information, see
MADRIX PLEXUS User Manual (English)
to increase Speed.
Managing Devices
13
Remote Control.
(How To Edit
Further.