MADRIX PLEXUS Handbuch Seite 104

104 MADRIX 3 PLEXUS User Manual / Handbuch
'Invert' defines if the status of the Port (1 = On, 0 = Off) will be reversed to 0 = On, 1 =
Off.
'Action' defines the type of event that will be triggered when a Port is triggered.
Applicable values are: 'No', 'Scene', 'Intensity', 'Speed', 'Next', 'Previous',
'Stop', 'Play', 'Pause', 'Play / Pause', 'Freeze'. 'Scene' will trigger a Scene.
'Intensity' adjusts the brightness. 'Speed' will trigger a change of tempo. 'Next' or
'Previous' skip to the last or next entry. 'Stop', 'Play', and 'Pause' end, start, or
halt the playback. 'Play / Pause' will start or halt the playback. 'Freeze' will halt
the output.
'Value' defines the 'Action' in more detail. Enter a number to specify a certain Scene.
Enter a value from 0 to 100 for 'Intensity'. Enter a value from 1 to 1000 for
'Speed'.
'Threshold can be entered when using 'Analog Input'. Specify the limit an analog input must
High' be moved above to before the event is triggered.
'Threshold can be entered when using 'Analog Input'. Specify the limit an analog input must
Low' be moved below before the event is triggered.
DMX Data Files:
The tab 'DMX Data Files' shows all DMX Data iles (*.dxd) that are used in the selected PLEXUS
Configuration. It represents a database of your DMX Data files within one PLEXUS Configuration.
(Remember that you need DMX Data files (*.dxd) in order to create Scenes.)
First, please select one PLEXUS Configuration you wish to edit.
© 2017 inoage GmbH