MADRIX PLEXUS Handbuch Seite 127

PLEXUS driver supports detection of hardware model.
Version 1.07.4369
Released with: MADRIX 2.14b (2.14.2.1) - December 2012
Also valid for: MADRIX 3.0 (3.0.0.5) - July 2013 / MADRIX 3.0a (3.0.1.0) - September 2013 /
MADRIX 3.1 (3.1.0.1) - November 2013 / MADRIX 3.1a (3.1.1.1) - January 2014 / MADRIX 3.2
(3.2.0.3) - March 2014
Requires PLEXUS driver 6.0.0517.2
Improved PLEXUS menu: 'Intensity/Speed' now includes settings for Intensity Groups for Remote
Control.
Improved button assignment for Reset To Factory Defaults and rotated displays.
Fixed an issue with the menu Monitor DMX and not displaying values correctly for the last DMX
channel in Channel mode.
Fixed an issue with the Bootlader not allowing firmware updates anymore.
Fixed an issue with unintended display errors of file names during upload when a long file name
was followed by a short file name.
Fixed an issue with DMX-controlled Intensity Groups putting out a value of 100% when 39% is
set up (Remote Control).
Increased the timeout value to 20 seconds instead of 3 seconds for the display, when the SD
card is formatted.
Fixed an issue with prevented data upload or formatting of the SD card for Slave devices when
receiving live sync commands from a Master device.
PLEXUS driver supports detection and setup of Intensity Group settings (PLEXUS Configuration
window).
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English) 127