MADRIX PLEXUS Handbuch Seite 102

102 MADRIX 3 PLEXUS User Manual / Handbuch
'Action' defines the type of Timer. Applicable values are: 'Scene', 'Intensity', 'Speed,
'Next, 'Previous', 'Stop', 'Play', 'Pause', 'Port 1', 'Port 2', 'Port 3', 'Port 4',
'Port 5', 'Port 6', 'Port 7', 'Port 8', 'Port 9', 'Port 10'. 'Scene' will trigger a
specific Scene to be played. 'Intensity' will trigger the brightness of the output to
change. 'Speed' will trigger a change of tempo. 'Next' or 'Previous' skip to the last
or next entry. 'Stop', 'Play', and 'Pause' end, start, or halt the playback. 'Port' will
trigger the specific Port of the extension port.
'Value' is a field that depends on the 'Action'. Enter a number to specify a certain
'Scene'. Enter a value from 0 to 100 for 'Intensity'. Enter a value from 1 to 1000
for 'Speed'. Select 0 (Off) or 1 (On) for 'Port'.
'Type' defines the how often the 'Action' is triggered. Applicable values are: 'Once',
'Cycle', 'Daily', 'Weekly', 'Monthly', 'Yearly'. 'Once' will trigger the event only
one time. 'Cycle' will trigger the event according to the 'Cycle Interval', for
example every 10 minutes.
'Time Type' includes various variables: 'Time', 'Sunrise', 'After Sunrise', 'Before Sunrise',
'Sunset', 'After Sunset', 'Before Sunset'. Choose 'Time' to exactly define the
time and date under 'Start'. Choose 'Sunrise' or 'Sunset' to begin at sunrise or
sunset. Those times will be automatically calculated according to the Geographic
Coordinates. Use 'Start' to define the start date. Choose 'After Sunrise', 'Before
Sunrise', 'After Sunset', or 'Before Sunset' to use the automatically calculated
sunrise and sunset times together with an offset (in hours:minutes:seconds). The
offset can be set in the 'Start' column, value 'Time'. For example, you may trigger
the Timer 2 hours before sunset on May 12, 2012.
'Start' defines the date and/or time, when the event will be triggered. Depending on the
"Time Type" an offset may be set up.
'Valid From' defines together with 'Valid Thru' a time interval, in which the event will be
triggered. 'Valid From' sets the starting point.
© 2017 inoage GmbH