MADRIX PLEXUS Handbuch Seite 22

22 MADRIX 3 PLEXUS User Manual / Handbuch
Device
Location
Navigate to the menu 'Settings' > 'Device'.
You may change basic settings of the device in this menu.
'Language' - specifies the language of the PLEXUS menus. You can set
English, German (Deutsch), or Spanish (Español).
'Rotate 180°' - will rotate the display by 180°. The displayed menus will
be shown upside down. Please note, at the same time the assignment
of the 5 control buttons will also be rotated by 180° to suit the rotated
display. The default settings is No.
'Timers' - can be 'Enabled' or 'Disabled'. This activates or deactivates all
Timers on the device globally, even if they are configured in your
PLEXUS Configuration. The default settings is Enabled.
'Ports' - can be 'Enabled' or 'Disabled'. This activates or deactivates all
Ports on the device globally, even if they are configured in your PLEXUS
Configuration. The default settings is Enabled.
You may change the settings in this menu, on the device
Values).
You can also configure the settings in the PLEXUS Configuration window
in MADRIX. For more information, see
Navigate to the menu 'Settings' > 'Location'.
You may change settings of the geographical location of the device in
this menu.
Use or to change values.
Use or v to switch to the next variable.
'Latitude' - specifies the geographical position (North - South).
'Longitude' - specifies the geographical position (East - West).
'Time Zone' - specifies the time zone region.
(How To Edit
Managing Devices Further.
© 2017 inoage GmbH