MADRIX PLEXUS Handbuch Seite 54

54 MADRIX 3 PLEXUS User Manual / Handbuch
Further Configuration
You can also define the 'Frame Time' in ms for each device. Frames per second (FPS) will be
adjusted automatically according to the frame time.
Setting up the frame time can help in different cases. For example, certain LED fixtures might work
best with a specific frame rate. Make sure to use the optimal frame rate for your fixtures. Some
LED fixtures might have problems with high frame rates. Then, you can increase the frame time
and the FPS will be adjusted automatically.
Always click 'Apply' to activate any changes you made.
Activate 'Full Frames' if PLEXUS devices should always send full frames,
instead of optimized frames on a particular universe. Sending full frames means that always the full
512 DMX channels of a DMX universe will be sent with every frame (even when you are using less
than 512 channels per universe). Otherwise, MADRIX will send the number of DMX channels that is
configured.
Always click 'Apply' to confirm any changes you made.
© 2017 inoage GmbH