Webserver - MADRIX PLEXUS Handbuch

44 MADRIX 3 PLEXUS User Manual / Handbuch
Web Server
Introduction
The PLEXUS provides an integrated web server.
There two ways to gain access to this web server for remote control, directly via a web browser
or by using the PLEXUS Configuration window in MADRIX. Both ways will allow access to the
interactive demonstration in your web browser.
Using A Web Browser
1) Connect your PLEXUS as well as the remote device accessing the PLEXUS to a network (USB
will not work).
2) Open a web browser and type in the IP address of your PLEXUS. The IP address can be found
and changed in the PLEXUS menu 'Network' > 'IP Address'.
3) Once loaded, the page will show an interactive illustration of your device for remote control.
The graphical interface represents the menu of your PLEXUS in real time. In this way, you can use
various devices (such as smartphones, tablets, etc.) to control your PLEXUS remotely.
Please note: Make sure to use one and the same network and check if the PLEXUS device
settings and the operating system settings of the remote device are correct.
Using The PLEXUS Configuration Fenster
1) Connect your PLEXUS as well as the remote device accessing the PLEXUS to a network (USB
will not work).
2) In MADRIX go to the menu 'Tools' > 'PLEXUS Configuration...' (or 'Ctrl+Alt+P').
© 2017 inoage GmbH