Exports the MADRIX PLEXUS Device Settings to an external file (*.mpds). Use
this option to easily store all device settings (as described in the table below).
Synchronizes the internal clock of the PLEXUS with the clock of your computer.
The computer clock will define the time and date that is used. First, select your PLEXUS devices in
the list. Then, click 'Sync Clock.
Upgrades the firmware of your MADRIX PLEXUS (USB connection required). For
further instructions, see
Columns (Device Settings)
In addition, please edit the following columns according to your requirements.
Each column represents a certain setting of the device, which can often be adjusted in the
various menus on the device itself.
For more information about each PLEXUS menu, please see chapter
Menus).
(Perform a double-click to change their values. Use Enter to apply your changes. Use Escape to
cancel.)
'Name'
© 2017 inoage GmbH
MADRIX PLEXUS
defines the name (label) of the device.
On the device, check the menu 'Information' > 'Status'.
MADRIX PLEXUS User Manual (English)
(Firmware).
LCD Graphics Display (PLEXUS
111