MADRIX PLEXUS Handbuch Seite 114

114 MADRIX 3 PLEXUS User Manual / Handbuch
'Art-Net -> DMX defines which Art-Net universe is assigned to the first XLR port for output
1' (DMX 1).
On the device, use the menu 'Network' > 'Art-Net'.
More information is provided in the chapter
'Art-Net -> DMX defines which Art-Net universe is assigned to the second XLR port for output
2' (DMX 2).
On the device, use the menu 'Network' > 'Art-Net'.
More information is provided in the chapter
'DMX 1 -> is used for Art-Net output from stand-alone playback. It defines on which
Art-Net' Art-Net universe the SD card data for port DMX 1 is sent. In this way, it
routes the data from DMX 1 to the specified Art-Net universe.
'DMX 2 -> is used for Art-Net output from stand-alone playback. It defines on which
Art-Net' Art-Net universe the SD card data for port DMX 2 is sent. In this way, it
routes the data from DMX 2 to the specified Art-Net universe.
'Serial Number' cannot be edited. It shows the serial number of the device.
On the device, check the menu 'Information' > 'Version'.
'Firmware' cannot be edited. It shows the current firmware version of the device.
On the device, check the menu 'Information' > 'Version'.
'Brightness' defines how bright the display is, when it is used. Applicable values are: 10 -
100%. The default value is 100%.
On the device, use the menu 'Settings' > 'Display'.
'Brightness defines how bright the display is, when it gets dimmed. Applicable values
Dimmed' are: 0 - 100%. The default value is 10%.
On the device, use the menu 'Settings' > 'Display'.
Art-Net (Output).
Art-Net (Output).
© 2017 inoage GmbH