Firmware Release Notes - MADRIX PLEXUS Handbuch

Firmware Release Notes

1.4.1
Version 1.00.2981
Released with: MADRIX 2.13 - July 2011
Requires PLEXUS driver 6.0.510.5
The first firmware version of the MADRIX PLEXUS. The product was launched with this firmware
version.
Version 1.01.3053
Released with: MADRIX 2.13a - August 2011
Requires PLEXUS driver 6.0.510.5
Improved reliability of the USB connection. Fixed some issues when sending data over USB.
Improved reliability of the USB connection. When using the USB connection, the MADRIX license
will not be lost after 1 minute anymore.
Added a timeout of 3 seconds for PLEXUS devices at startup for improved network behavior.
Playback is delayed to ensure that all Slave devices are ready in the network after startup.
Added IP address range validation for networks. Devices filter out broadcast signals that do not
belong to the same network.
Added Exception-Trace. Should an error occur on the device, the exception trace will be
displayed on the PLEXUS display and functions as an error message to be analyzed by the
manufacturer.
© 2017 inoage GmbH
MADRIX PLEXUS User Manual (English) 123