MADRIX PLEXUS User Manual (English)
121
PLEXUS Device Settings
Sync
Instead of using the PLEXUS Configuartion window, you may check the settings on the device
itself.
Navigate to the PLEXUS menu 'Network' > 'Sync'.
This menu shows the current settings regarding Master-Slave Synchronization of your current
PLEXUS Configuration.
You can check the Sync Type (Master, Slave, Off) and Sync Group (1 -256).
Also, check if Intensity (Enabled, Disabled), Intensity Group (Enabled, Disabled), Speed (Enabled,
Disabled) and Freeze (Enabled, Disabled) should be synchronized for Slave devices.
© 2017 inoage GmbH