3) Click
Please note: Make sure to use one and the same network and check if the PLEXUS device
settings and the operating system settings of the remote device are correct.
Your device will not appear in the PLEXUS Configuration dialog, as being connected to
network, when the network settings are incorrect.
4) Select your device in the list.
via network.
5) Click 'Call' (Network connection required).
6) Your standard web browser will be opened automatically and load a page.
7) Once loaded, the page will show an interactive illustration of your device for remote control.
The graphical interface represents the menu of your PLEXUS in real time. In this way, you can
control your PLEXUS remotely.
© 2017 inoage GmbH
to search for your connected devices.
The network symbol will indicate that the device is connected
MADRIX PLEXUS User Manual (English)
45