Remote Control; Control Buttons; Extension Port - MADRIX PLEXUS Handbuch

MADRIX PLEXUS User Manual (English) 37

Remote Control

1.2.6

Control Buttons

A limited option to control the PLEXUS is to use the control buttons on the device during stand-
alone playback. For more information, see Control Buttons.
DMX-IN
DMX-IN is a way to control the MADRIX software remotely. Learn more about this topic in the
chapter DMX-IN (Input).

Extension Port

The extension port is another option for remote control, when connecting external units to the
port. For more information, see Extension Port.
Direct Remote Control Of The Device Via DMX Or Art-Net
Introduction
You can send DMX or Art-Net values directly to the MADRIX PLEXUS. In this way, you can control
the PLEXUS remotely using a certain set of remote functions (as listed below).
The PLEXUS will react to incoming DMX or Art-Net values and perform certain actions as a result.
These remote control options are available independently of DMX-IN or Art-Net Remote, both of
which will allow you to control the MADRIX software instead. With Remote Control via DMX or Art-
Net you can directly communicate with the PLEXUS unit.
Remote control via DMX means that you will connect an external DMX unit to one of the XLR ports
of the MADRIX PLEXUS. The occupied port will no longer be available for DMX-OUT (output).
© 2017 inoage GmbH