Configuring Your Virtual Led Matrix In Madrix; Configuring Dmx-Out In Madrix; Activating Your Device - MADRIX PLEXUS Handbuch

52 MADRIX 3 PLEXUS User Manual / Handbuch
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX directly to a free USB 2.0 port of your computer. If the MADRIX
PLEXUS driver has been installed properly, the status LEDs will light up accordingly, as described in
the chapter Troubleshooting.
Start the MADRIX software now if not yet done.

Configuring Your Virtual LED Matrix In MADRIX

You will need to configure your virtual LED matrix according to your LED installation.
In MADRIX, navigate to the menu 'Preferences' > 'Matrix Generator...' or 'Preferences' >
'Patch Editor...' for this task.
For more information, please read the MADRIX Help And Manual.

Configuring DMX-OUT In MADRIX

Activating Your Device

In MADRIX, navigate to 'Preferences' > 'Device Manager...' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices.
Click this button if your device is not shown in the list in order to search for
connected devices.
Two list entries will be created for your PLEXUS device, one entry for every DMX port ('DMX 1' and
'DMX 2').
© 2017 inoage GmbH