Configuring Dmx-In In Madrix - MADRIX PLEXUS Handbuch

58 MADRIX 3 PLEXUS User Manual / Handbuch
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX directly to a free USB 2.0 port of your computer or use the USB
power supply (or USB 2.0) and the network connection for Art-Net. If the MADRIX PLEXUS driver
has been installed properly, the status LEDs will light up accordingly, as described in the chapter
Troubleshooting.
Start the MADRIX software now if not yet done.

Configuring DMX-IN In MADRIX

Activating Your Device
In MADRIX, navigate to the menu 'Preferences' > 'Device Manager...' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices which were found in the network.
Click this button oíf your device is not shown in the list in order to search for
connected devices.
Two list entries will be automatically created for your PLEXUS device, one entry for every DMX
port ('DMX 1' and 'DMX 2').
© 2017 inoage GmbH