Storz AUTOCON II 400 Gebrauchsanweisung Seite 133

124
Downloaded from www.Manualslib.com
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and the
®
The AUTOCON ll 400 model 20 5352 20-11x is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
and people.
manuals search engine
Appendix
Electromagnetic Compatibility (EMC)
Information
Table 206
®
AUTOCON ll 400 model 20 5352 20-11x
according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
⎡ 3 5 . ⎤
= =
d P d
⎢ ⎣ ⎥ ⎦
3
0.12
0.38
1.2
3.8
12
Приложение
Указания по электромагнитной
совместимости (ЭМС)
Separation distance d [m]
800 MHz to 2.5 GHz
⎡ 3 5 . ⎤
P
⎢ ⎣ ⎥ ⎦
3
0.12
0.38
1.2
3.8
12
⎡ 7 ⎤
=
d P
⎢ ⎣ ⎥ ⎦
3
0.23
0.73
2.3
7.3
23