Novoferm iso20-4 Montage-, Bedienungs- Und Wartungsanleitung Seite 15

GB
In the case of doors with tension springs, the multiple spring
assemblies and double cables must be replaced after approx.
25,000 cycles (see installation instructions).
If material or manufacturing faults have demonstrably rendered
the doors or parts of them unfit for use or have considerably
impaired their usability, we shall, at our own discretion, repair or
replace them free of charge.
No liability is accepted for damage caused by faulty or improper
installation, commissioning or operation, failure to perform the
specified maintenance, exposure to undue loads or any unau-
thorized changes to the structure of the door. Original spare
parts only must be used when adding to, or modifying the doors
or when replacing parts in the course of maintenance or repair
works. The same applies to any damage caused during trans-
portation, by force majeure, foreign objects, natural wear and
tear, or atmospheric influences.
The warranty also lapses in the event of failure to observe our
installation and operating instructions.
No liability is accepted if unauthorized changes or repair work
are carried out on functional parts or additional filling weight is
added which can no longer be compensated by the prescribed
tension springs.
The surface warranty for all door leaves with final coating in
original colour that are installed in Germany extends to the
adhesion of the colour and/or foil, corrosion protection, and fade
resistance. Slight changes in colour that can occur over time
are excluded from the warranty. Doors and door surfaces in
coastal areas are subject to aggressive climate influences and
require appropriate additional protection. Any and all flaws or
defects arising as a result of damage to the product, such as
abrasion, mechanical or wilful damage, soiling and improper
cleaning, are excluded from this warranty.
In the case of base-coated doors, the top coat must be applied
on site within three months from the date of delivery. Small
surface flaws, minor corrosion, dust inclusions or surface
scratches on base-coated doors do not constitute grounds for
complaint since they will disappear once the surface is sanded
and the top coat applied.
Exposure to direct sunlight may cause doors with a width of
about 3 metres or more or with a dark paint or foil surface to
bend, and functionality may be impaired.
Our products are subject to technical alterations in the course of
product modifications, changes in colours or materials, or im-
provements to production processes, which may alter their
appearance; such alterations are deemed conditionally ac-
ceptable when replacing parts under warranty.
Any faults must be communicated to us in writing immediately,
and the parts concerned must be sent to us upon request. We
will not bear any costs of removal, installation, freight or post-
age. In the event that a complaint ultimately proves to be unjus-
tified, we reserve the right to charge the costs incurred.
This guarantee is only valid together with the signed invoice
and starts on the day of delivery.
Keep these installation, operating, and maintenance instructions in a safe place during the entire service life of the garage
door!
- 12 -