Inhaltsverzeichnis - OMCN ROLL R8 SONAR P-LOCK Betriebsanleitung

9. Wheel balancing
9.1 Important notes on balancing
9.2 Working area
9.3 Overview of balancing programs
9.4 Automatic selection of balancing program
9.5 Electronic wheel data recording
9.5.1 Standard, ALU1 (PAX1), ALU4, ALU5
and all static balancing programs
9.5.2 ALU2 (PAX2) and ALU3
9.6 Manual wheel data recording
9.6.1 Standard, ALU1 (PAX1), ALU4, ALU5
and all static balancing programs
9.6.2 ALU2 (PAX2), ALU3
9.7 Measuring imbalance
9.8 Attaching balance weights
9.8.1 Overview of tools for attaching the
balance weights
9.8.2 Positioning the wheel
9.8.3 Splitting balance weights (SPLIT
program)
9.9 Attaching clip-on balance weights
9.10 Fastening the adhesive balance weights
manually using the laser beam
9.11 Attaching the adhesive balance weights
9.11.1 Overview of tools to be used
9.11.2 With electronic rim-distance gauge
9.11.3 With manual vernier caliper
10. Imbalance minimization
11. Faults
OMCN spa
87 12. Maintenance
87 12.1 Cleaning and maintenance
88 12.2 Maintenance intervals
89 12.3 Spare and wearing parts
90 12.4 Maintenance work
92 12.4.1 Remove condensate
12.4.2 Recommended lubricants/oil
92 mist lubricator
92 12.4.3 Topping up the oil in oil
93 mist lubricator
12.4.4 Replacing the oil in the oil
93 mist lubricator
94 12.4.5 Setting the lubricating oil flow
95 12.5 Calibration
95 12.5.1 Opening the calibration menu
12.5.2 Calibrating the flange
95 12.5.3 Calibrating the rim-distance gauge
95 and sonar
12.5.4 Calibrating with wheel and sample
97 weight
97
13. Decommissioning
98 13.1 Temporary shutdown
98 13.2 Change of location
98 13.3 Disposal and scrapping
98 13.3.1 Substances hazardous to water
99 13.3.2 ROLL R8 (P-LOCK)
and accessories
100
14. Technical data
102 14.1 ROLL R8 (P-LOCK)
14.2 Temperatures
14.3 Working range
14.4 Dimensions and weights
| ROLL R8 (P-LOCK) | 59
xxx
|
1 695 600 696
en
104
104
104
104
104
104
104
104
105
105
105
105
106
106
108
109
109
109
109
109
110
110
110
110
110
111
2016-09-30