3M Clean-Trace NG Benutzerhandbuch Seite 7

(English)
the 3M clean-trace nG Luminometer will now perform an initial background and calibration check.
If the initial background and calibration check are within limits, the screen on the right will be displayed.
should the initial background measurement fail, see the troubleshooting guide in section 9 of this manual.
Pressing the OK button will display the main system menu.
Within the 3M™ clean-trace™ Data trending software it is possible to set up a unit Password to prevent unauthorized use of the 3M clean-trace
nG Luminometer. If this has been set up, a numeric password will be required prior to the initial background measurement as shown above.
5