3M Clean-Trace NG Benutzerhandbuch Seite 21

use the navigation buttons to select DATE FORMAT and press the Change button repeatedly until the required format is shown.
Press the back button to return to the SETUP menu or use the navigation
6.04 Setting the Time Format
While in the DATE & TIME menu, use the navigation
time format between 12 / 24 hour clock. When correct, press the back button to return to the SETUP menu or use the navigation
to select another item in the DATE & TIME menu.
6.05 Setting the Date
While in the DATE & TIME menu, use the navigation
pressed. use the navigation
the 'Month' will now be highlighted on the display. set the 'Month' using the navigation
the 'Year' will now be highlighted on the display. set the 'Year' using the navigation
now use the navigation
Note: each time a sample plan is transferred from 3M clean-trace Data trending software, the Date and time details on the Pc is also transferred.
the Pc and instrument time will be synchronized.
buttons to select TIME FORMAT. Pressing the Change button repeatedly will cycle the
buttons to select SET DATE 'Day' is highlighted only after the select function button is
buttons to change the 'Day' until correct. Press the OK Button.
buttons to select another item in the DATE & TIME menu or press back to return to the SETUP menu.
buttons to select another item in the DATE & TIME menu.
buttons then press OK.
buttons then press OK.
19
(English)
buttons