3M Clean-Trace NG Benutzerhandbuch Seite 17

(English)
note that the measurement screen now displays 'retest'.
the new result is stored in the 'retest' area of the screen. this time the result is a pass.
It is possible to retest the point several times until a pass is obtained. the screen will only show the first and most recent but all previous retests are
actually stored.
Note: It is possible to exit from a set of results and re-open it at a later time. For example, if not all measurements were taken at that time or if there is
a need to go back into set of results to perform retests, this may require returning to an unfinished set of results to collect more data.
5.04 Reviewing and Printing results
It is possible to review and inspect previous results and to print to an external 3M printer either individual tests or a series of tests from one result set
in a given sample plan.
From the MAIN MENU use the navigation buttons to highlight review results and press the Select button.
the list of sample plans stored on the 3M clean-trace nG Luminometer will be displayed. use the navigation buttons to highlight the plan
to be reviewed or printed and press Select.
use the navigation buttons to highlight the required result set to review or print and press Select.
15