Delivery Set - Vitek VT-1993 W Betriebsanweisung

Symbols «EE01» appear on
the display, accompanied by
repeated sound signals
Symbols «ЕЕE» on
display, accompanied
repeated sound signals
Symbols «HHH» on
display, accompanied
repeated sound signals
Smoke from the ventilation
openings
The baked bread dropped,
the bottom part of the bread
is damp
The bread is stuck in the
baking form
The bread structure is not
homogeneous or the bread
went wrong

DELIVERY SET

Bread maker – 1 pc.
Baking form – 1 pc.
Kneading paddle – 1 pc.
Measuring cup – 1pc.
Measuring spoon – 1 pc.
Hook – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICTAIONS
Power supply: 220-240 V ~ 50/60Hz
Maximal power consumption: 650 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
The unit has not cooled
down after the previous
baking cycle
the Temperature sensor
by damage
the Temperature sensor is not
by working because of short
circuit
Ingredients got onto the
heating element
The bread was kept in the
bread maker for too long
after baking
The kneading paddle is
stuck in bottom part of
bread
Wrong mode is selected
Accidental pressing
«START/STOP» button
during the operation
process
Frequent opening of the
lid during the operation
process
A long power cutoff during
the operation process
The paddles movement is
blocked
15
Unplug the unit, take the form out, let the
unit cool down at room temperature
Switch the unit off and contact the
authorized service center
Switch the unit off and contact the
authorized service center
Switch the unit off by unplugging the
power cord plug from the socket. Take
the form out, let the unit cool down. Wipe
the walls of the process chamber and the
heating element with a damp cloth.
When making bread according to the
recipe switch the unit off immediately after
the bread is ready
Grease the paddles with oil before
assembly
View the available baking programs, select
another program by pressing the «MENU»
button repeatedly
of Load all necessary ingredients again and
start the baking process from the very
beginning
Open the lid only upon the request of the
program in order to add supplementary
ingredients.
Load all necessary ingredients again and
start the baking process from the very
beginning
Take the form out and check if the drive is
rotating. In case of any defect contact the
authorized service center
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (73/23 EEC)
ENGLISH