Closing Battery Cover; Battery Discharge Indicator, Battery Discharge Monitor, Operating Hour Meter - Jungheinrich EFG-DH ac 10 Betriebsanleitung

6

Closing battery cover

With Multi-Pilot (o):
–– Push the control valve hood beyond
the locking point until the hood is auto-
matically closed by spring force.
With Solo-Pilot (t):
–– After closing the battery cover, swivel
control valve cover to the back until it
engages.
7

Battery discharge indicator, battery discharge monitor, operating hour meter

Battery discharge indicator: The loading status of the battery (10) is indicated in
steps of 10% on the information and service indicator (100% = battery capacity 100%,
display 0% = battery capacity 20%).
m
The manufacturer setting of the bat-
tery discharge indicator / discharge
monitor is standard batteries.
It is required to recharge the bat-
tery, if the
amounts to 20% for standard bat-
teries or 40% for maintenance-free
batteries.
Battery discharge monitor: If the
residual capacity falls below the
specified minimum value, the lifting
function is switched off. A corre-
sponding message is displayed in
the information and service indica-
tor.
A
The lifting function will only then be released, if the connected battery is reloaded by
min. 40%.
Operating hours counter: The operating hours (11) are indicated next to the battery
discharge state. The operating hours counter indicates the overall times of driving
and lifting movements (below “"Eff”").
D 6
residual capacity
11
10