B) Wd Monster Truck Chassis - Reely ICE TIGER Bedienungsanleitung

3. Description of the model
b) 2WD Monster Truck Chassis
2/4 WD
2/4 Wheel Drive driven by  or 4 wheels.
Ackermann effect
In order to set-up progressivity of the full lock on the inner corner wheel (Ackermann angle), the steering is transformable
in the steering arms into different directions.
Air filter
The air filter is made of foam and prevents the penetration of dust and dirt particles through the suction hole into the carburettor and in the engine.
Alignment
Position of the wheel level to the driving direction:
a) Toe-in – Wheels point inwards
b) Toe-out – Wheels point outward
Axle leg
This is where the axle turns. The steering levers are located on the front axle legs.
Bumper
Made of impact resistant synthetic material for excellent damping in case of a frontal crash.
Casting
Angle of the pivot pin in driving direction. If the point of intersection of an imaginary line is parallel to the pivot pin with the
underground in front of the wheel contact point, one speaks of casting.
Chassis
The "frame" of the vehicle, to be precise, only the bottom support plate.
Damper plate
The upper end of the shock absorber of an axle right and left is screwed to the damper plate at the front or at the rear.
The shock absorbers are thus somehow interconnected via the damper plate.
36
a b
nachspur.eps
vorspur.eps
Operating Instructions WD GP Monster Truck Ice Tiger 1/6 No. 35390
Driving direction
vorlauf.eps