Technical Data - Reely ICE TIGER Bedienungsanleitung

8.

Technical Data

Engine:
22.5 cc two-stroke combustion engine
with cable pull starter and carburettor
Cubic capacity:
Performance:
Borehole:
Hub:
Weight:
Tank capacity:
Power transmission:
Rear wheel drive:
Transmission ration 7,7: 1
Chassis:
Mounting plate with cropped sides made of anodized aluminium, extremely light, firm and warp-resistant, CNC-milled
Roll cage made of impact resistant plastic material
Front wheel suspension:
Tie rods:
Knuckle:
Brake:
Suspension:
Tyres:
Front/rear:
Measure and weight
(dimensions excluding body)
Total length
695 mm
54
.5 cc
1.78 kW/.4 PS at 14.000 rpm
3 mm
8 mm
approx. 070 g
approx. 580 cc
via a two-stage spur gear on the rear axle differential
main pinions made of steel
All drive axles are mounted with ball bearings.
1st gear speed 4t : 40t
nd gear speed 16t : 49t
with centrifugal clutch
Twin control arm suspension
Turnbuckle in the upper suspension arm
Rear wheel suspension: Twin control arm suspension
Turnbuckles in the upper suspension arms
(front/ rear camber adjustable)
Turnbuckles in the lower suspension arms
Rear toe adjustable
Turnbuckles in the suspension arms
Front toe adjustable
Impact-resistant plastic
Double disk brake
with two composite fibreglass brake disks on the drive shaft
Spring struts with aluminium oil-dampened shock absorbers,
spring preload adjustable via knurled nut,
Monster Truck tyres
Width: 95 mm, Ø 180 mm
Wheel base Width
485 mm 415 mm
Wheel track Height
375 / 405 mm 295 mm
Operating Instructions WD GP Monster Truck Ice Tiger 1/6 No. 35390
Weight with engine
(as in delivery)
ca. 10200 g