Siemens SIMOCODE pro Handbuch Seite 522

Tabellen
16.2 OPC-UA-Variablen
Node-ID
180
181
182
183
184
185
186
187
188
189
192
193
194
195
196
197
198
199
200
201
202
204
205
206
208
209
210
212
213
214
215
216
217
218
219
220
228
229
230
522
DatenTyp
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
-
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Boolean
Unsigned Byte
Boolean
Boolean
Boolean
Beschreibung
Event - Limit Monitor 1
Event - Limit Monitor 2
Event - Limit Monitor 3
Event - Limit Monitor 4
Event - External Fault 1
Event - External Fault 2
Event - External Fault 3
Event - External Fault 4
Event - External Fault 5
Event - External Fault 6
Event - AM1 Open Circuit
Event - DM-F Safety-oriented tripping
Event - Monitoring interval for mandatory testing -
Test required
Event - Time set (NTP)
-
Event - Time synchronized (NTP)
Event - DM-F LOCAL o.k.
Event - DM-F PROFIsafe active
Event - Configured Operation Panel missing
Event - Module not supported
Event - No module voltage
Event - Memory Module read in
Event - Memory Module programmed
Event - Memory Module erased
Event - Initialization Module read in
Event - Initialization Module programmed
Event - Initialization Module erased
Event - Parameter Blocking during start-up active
Event - Parameter changes not allowed in the current
operating state
Event - Device does not support the required functions
Event - Wrong Parameter
Event - Wrong Password
Event - Password Protection active
Event - Factory Settings
Event - Parameter setting active
Event - Prm-Error-Number
Event - DM-F LOCAL configuration mode
Event - DM-F LOCAL - Actual configuration and desired
configuration different
Event - DM-F LOCAL waiting for start-up test
Systemhandbuch, 01/2015, NEB631672701000/RS-AB/002
SIMOCODE pro PROFINET