Emergency Stop Switch - Vatech Green X 12 Bedienungsanleitung

1. Imaging System Overview

Emergency Stop Switch

1.7.2
The emergency stop switch is located under the handle frame. Press the switch to stop
the equipment in an emergency. The emergency may include the following situation
but is not limited to:
▪ When the X-ray emission continues after releasing the exposure switch
When the equipment hits the patient, a mechanical failure occurs.
▪
To restart the equipment after the situation is resolved, turn the switch until it pops up
again.
Exposure Switch
1.7.3
The exposure switch allows the operator to control image acquisition from outside of
the X-ray room.
Press and hold the exposure switch down until the acquisition is completed.
Premature release of the exposure switch will abort image acquisition.
Pressing the exposure switch activates the LED indicator to turn yellow. This color
indicates that the X-ray is being emitted.
20
Ensure the exposure switch cable is not detached from the
equipment during the operation.
Keep vocal/visual contact with the patient during exposure.
In an emergency, release the exposure switch immediately.
Green X 12 (Model: PHT-75CHS) User Manual
TM