– Do not pull the power plug from the socket by the power cable; grasp
the power plug to do so.
– Never touch the power plug with wet hands.
– Never pull on the power cord to move the device. Make sure the power
cord is not pinched or kinked.
Do not let the power cord hang from the work surface (tripping
–
hazard!) and make sure that it does not touch hot surfaces.
– Do not use multiple sockets or extension cords. If you do, make sure
the cords meet the necessary safety standards.
– The device must not be operated using an external timer or remote
control system.
– Only place the device on flat , stable surfaces.
– Make sure the surface is heat-resistant (do not place it on a tablecloth,
wooden board, etc.).
– The device must never be placed or operated on hot surfaces
(stovetop) or near open gas flames.
– Make sure that the warm/hot parts do not come into contact with
flammable objects such as curtains, tablecloths, etc. Risk of fire!
– Use the device indoors only, not outdoors.
– Only use the device in a clean, dust-free environment.
– Do not use the device in humid environments such as bathrooms or
near sinks.
– If liquid has entered the device, switch it off immediately and unplug it.
– Do not cover the device and do not place or place other objects on it
(newspapers, tablecloths, etc.).
– Do not place any objects filled with liquid on the device.
– Do not place burning candles on the device.
– Ensure that the device is free-standing and not covered during
operation. It must not be placed underneath a wall cabinet. A safe
distance should be maintained on all sides. The ventilation slots on the
bottom of the device must not be covered or blocked.
– Do not insert any objects into the device openings (ventilation slots).
– Do not operate the device near flammable liquids or pressurized
aerosols.
– Do not use any accessories that are not included with the device.
Never immerse the device body, power cord, or plug in water or
–
other liquids. RISK OF ELECTRIC SHOCK!
22