hazard!) and make sure that it does not touch hot surfaces.
– Do not use multiple sockets or extension cords. If you do, make sure
the cords meet the necessary safety standards.
– The device must not be operated using an external timer or remote
control system.
– Only place the device on flat , stable surfaces.
– Make sure the surface is heat-resistant (do not place it on a tablecloth,
wooden board, etc.).
– The device must never be placed or operated on hot surfaces
(stovetop) or near open gas flames.
– Make sure that the warm/hot parts do not come into contact with
flammable objects such as curtains, tablecloths, etc. Risk of fire!
– Use the device indoors only, not outdoors.
– Only use the device in a clean, dust-free environment.
– Do not use the device in humid environments such as bathrooms or
near sinks.
– If liquid has entered the device, switch it off immediately and unplug it.
– Do not cover the device and do not place or place other objects on it
(newspapers, tablecloths, etc.).
– Do not place any objects filled with liquid on the device.
– Do not place burning candles on the device.
– Ensure that the device is free-standing and not covered during
operation. It must not be placed underneath a wall cabinet. A safe
distance should be maintained on all sides. The ventilation slots on the
bottom of the device must not be covered or blocked.
– Do not insert any objects into the device openings (ventilation slots).
– Do not operate the device near flammable liquids or pressurized
aerosols.
– Do not use any accessories that are not included with the device.
Never immerse the device body, power cord, or plug in water or
–
other liquids. RISK OF ELECTRIC SHOCK!
18