Description Of The Appliance - Klarstein Controlsync Bedienungsanleitung

Prior to starting up of the appliance
• Once this simple operation has been carried out the oven is ready to use for
cooking.
• This appliance is exclusively for domestic use.
• Use the oven to cook food only.
• Before cooking, make sure all oven accessories that are not required are removed
from the oven.
• Pre-heat the oven to the cooking temperature before using it.
• Place the cooking trays in the center of oven and leave space in between when
using more than one, so that the air can circulate.
• Do not put oven trays on the base of the oven or cover it with aluminium foil. This
will cause thermal accumulation. The cooking and roasting times will not coincide
and the enamel may be damaged.
• Try to open the oven door as little as possible to see the food (the oven light
remains on during cooking).
• Take care when opening the door to avoid contact with hot parts and steam.
• Read this guide, taking special note of the Safety Instructions section.
• Remove any protective film that may still be on your induction hob.

DESCRIPTION OF THE APPLIANCE

1. Rear left heating plate control knob
2. Front left heating plate control knob
3. Oven function selection knob
4. Oven temperature/time control knob
5. Front right heating plate control knob
6. Rear right heating plate control knob
7. Induction hob hob
7
EN
19