Care And Cleaning - Klarstein Controlsync Bedienungsanleitung

EN

CARE AND CLEANING

The settings below are guidelines only. The exact setting will depend on several factors,
including your cookware and the amount you are cooking. Experiment with the hob to
find the settings that best suit you.
What?
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
Boilovers, melts, and
hot sugary spills on
the glass
48
How?
Switch the power to the
hob off.
Apply a hob cleaner while
the glass is still warm (but
not hot!)
Rinse and wipe dry with a
clean cloth or paper towel.
Switch the power to the
cooker back on.
Remove these immediately
with a fish slice, palette
knife or razor blade scraper
suitable for induction glass
hobs, but beware of hot
cooking zone surfaces:
Switch the power to hob off
at the wall.
Hold the blade or utensil at
a 30°angle and scrape the
soiling or spill to a cool area
of the hob.
Clean the soiling or spill up
with a dish cloth or paper
towel.
Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
Important!
·When the power to the hob is
switched off, there will be 'no
hot surface' indication but the
cooking zone may still be hot!
·Heavy-duty scourers, some
nylon scourers and harsh/
abrasive cleaning agents may
scratch the glass. Always read
the label to check if your cleaner
or scourer is suitable.
·Never leave cleaning residue
on the hob: the glass may
become stained.
·Remove stains left by melts
and sugary food or spillovers
as soon as possible. If left to
cool on the glass, they may
be difficult to remove or even
permanently damage the glass
surface.
·Cut hazard: when the safety
cover is retracted, the blade in
a scraper is razor-sharp. Use
with extreme care and always
store safely and out of reach of
children.