Klarstein CONTROLSYNC Bedienungsanleitung Seite 114

EN
The induction
hob makes a low
humming noise when
used on a high heat
setting.
Fan noise coming
from the induction
hob.
Pans do not become
hot and appears in
the display.
The induction hob
or a cooking zone
has turned itself off
unexpectedly, a tone
sounds or an error
code is displayed.
50
This is caused by the
technology of induction
cooking.
A cooling fan built into
your induction hob has
come on to prevent
the electronics from
overheating. It may
continue to run even
after you've turned the
induction hob off.
The induction hob
cannot detect the
pan because it is not
suitable for induction
cooking.
The induction hob
cannot detect the pan
because it is too small
for the cooking zone or
not properly centred
on it.
Technical fault.
This is normal, but the noise
should quieten down or disappear
completely when you decrease
the heat setting.
This is normal and needs no
action.
Do not switch the power to the
induction hob off at the wall while
the fan is running.
Use cookware suitable for
induction cooking. See section
'Choosing the right cookware'.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
Please not down the error letters
and numbers, switch the power to
the induction hob off at the wall,
and contact a qualified technician.