Klarstein CONTROLSYNC Bedienungsanleitung Seite 90

EN
value and the setting icon
KB2 to set minute time.(0~59~0 recyclable)
• After adjusting the minutes, re-touch the
accomplished. And at this time, the clock setting icon
icon :"flashes (1s/1 time).
• When the hour and minute are set, the system clock setting icon
system clock icon
the system clock icon
not touch the
to the minute setting. If the
clock setting is completed, the system defaults to complete the clock setting and
automatically returns to the standby state. If the clock is not set within 20 seconds
after power-on, the system default clock is 12:00 and enters standby. If the power is
turned off, the clock will be reset.
• In the standby state, only the system clock is displayed.
Selecting a function
Under standby status, switch different functions by rotating the programming switch
KB1 in turn, refer to Pic 3 for the order. (Non-recyclable, oven function will remember
the last operation)
• When selecting the function, the clock position shows the default time of
the corresponding function (Clock position in Eco mode displays Eco"). The
temperature position shows the default temperature of the corresponding
function.
• Switching for the first time, for adjustable temperature function, the default
temperature value and temperature icon
icon
is not adjustable for that function level, the default clock value and the working
parameter setting icon
on.
• When selecting the function, you can switch to the temperature and working time
adjustment by touching the
• If you adjust temperature, the temperature value , temperature icon
working parameter setting icon
time value and working parameter setting icon
• The temperature value or working time can be set by rotating the programming
switch KB2. If the working time and temperature are not set, or not touching
confirm within 10 seconds of setting completion, the system automatically returns
26
" flash at this time, by rotating programming switch
is always on. After confirming, the setting icon
continues to be displayed. In the hour setting, if you do
button to confirm within 10 seconds, it will automatically switch
Pic 3: Oven function mode
flash as well as the oven working icon
" flashes as well as the oven working icon
" to confirm, clock setting
button is not confirmed within 10 seconds after the
", and the working parameter setting
is always on. If temperature
button.
flash; If you adjust the working time, working
flash.
goes out and the second
flashes and the
is off and
is always
" and the
to