Protection Function - Klarstein Controlsync Bedienungsanleitung

EN
Notes:
• During setup, second icon ":" and alarm clock icon
• During setup, touch
return to standby state.
• If a reminder function has been set, then reminder icon
displayed when the menu is working, and the reminder time can be queried.
Child lock function
• Lock: press and hold button
or working status. When the buzzer sounds once, it means entering the child lock
state. The children lock icon
• Unlock: press and hold button
status, The buzzer sounds once, the child lock icon
unlocked.
Notes
• Under children lock status, display will be same as normal state, all the buttons and
knobs operation will be invalid except the unlock button.
• When working at children lock status, you need to unlock first before you want to
stop working.
Start/pause/cancel function
1. After setting up the barbecue function, touch
touching
2. During oven barbecue, touch
and time will flash display, oven working icon
on; Touch
3. When setting system time, press
and return to standby state.
4. When oven function, working time and temperature are set, press
function setting state and return to standby state.
5. After setting the reservation function or entering the reservation function, press
the

Protection function

A. The display will show E-1 if sensor is short-circuited or disconnected, buzzer sounds
continuously for 10 times,1s/time(refer to picture 6).Touching
standby status at this time.
28
button will cancel the current reminder time setting and
button when the barbecue is suspended, you can restart the work.
button again will cancel current cooking.
button can return to the standby mode directly.
will always bright.
and simultaneously for 3 seconds at standby
keeps bright.
and simultaneously for 3 seconds at lock
button to start working; if
button once can pause the cooking, temperature
flashes, function icon is always
button to exit the clock setting state directly
should always be
goes out and can be
button to exit
button can return to