Electrical Connection - Klarstein Controlsync Bedienungsanleitung

EN

ELECTRICAL CONNECTION

This appliance must be earthed!
Our company shall not be held responsible for any damage caused by using the
appliance without an earthed socket. Risk of electric shock, short circuit or fire by
unprofessional installation! The appliance may be connected to the mains supply only
by an authorized qualified person and the appliance is only guaranteed after correct
installation.
Risk of electric shock, short circuit or fire by damage of the mains lead! The mains
lead must not be clamped, bent or trapped or come into contact with hot parts of the
appliance. If the mains lead is damaged, it must be replaced by a qualified electrician.
The mains supply must correspond to be data specified on the rating plate of the
appliance. The appliance mains cable must correspond to the specifications and the
power consumption.
Before starting any work on the electrical installation, please disconnect the appliance
from the mains supply.
Fitting guidelines
The cooker is manufactured to work with three-phase alternating current
(400 V/3N~50 Hz).The voltage rating of the cooker heating elements is 230 V. Adapting
the cooker to operate with one-phase current is possible by appropriate bridging in the
connection box according to the connection diagram below. The connection diagram
is also found on the cover of the connection box. Remember that the connection wire
should match the connection type and the power rating of the cooker.
The connection cable must be secured in a strain-relief clamp.
16
Warning! Risk of electric shock
All electrical work should be carried out by a suitably qualified and
authorized electrician. No alterations or willful changes in the electricity
supply should be carried out.