Klarstein CONTROLSYNC Bedienungsanleitung Seite 111

• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them. Even a thin film of water may make the controls
difficult to operate.
•
Choosing the right cookware
Only use cookware with a base suitable for induction cooking. Look for the induction
symbol on the packaging or on the bottom of the pan.
You can check whether your cookware is suitable by carrying out a magnet test. Move a
magnet towards the base of the pan. If it is attracted, the pan is suitable for induction.
If you do not have a magnet:
1. Put some water in the pan you want to check.
2. Follow the steps under ' To start cooking'.
3. If ' ' does not flash in the display and the water is heating, then the pan is suitable.
Cookware made by the following materials is not suitable: pure stainless steel,
aluminium or copper without a magnetic base, glass, wood, porcelain, ceramic, and
earthenware.
Size of burner (diam-
eter/mm)
160
180
• The pots and pans must be placed precisely in the middle of the cooking area.
• In some cooking areas an internal diameter is indicated, with a lighter outline,
which advises the user to go to a smaller cooking area, if available, with smaller
diameter pan. This is to obtain optimum performance and efficiency. You can
however use pans with smaller diameters than this limit.
The minimum cookware
(diameter/mm)
120
140
EN
47