Klarstein CONTROLSYNC Bedienungsanleitung Seite 99

Power interrupt
Oven stop
working in a
sudden during Normal close
working thermostat
protective
Not adjust the
temperature
controller
If this model have
timer, you may not
Oven not
heating set up the time
No power
Heating element was
damaged
Door seal is blow-by
Water come out
from the glass
Hinge is not strong
door when
enough
working
Oven working for a
long time, so cooling
Oven stop
oven need for a long
working but the
time
motor cool still
Normal open
working
thermostat have a
problem
If the problem has not been solved:
• Separate unit from the mains supply(deactivate or unscrew fuse).
• Call the Klarstein after-sales service.
• Do not attempt to repair the appliance yourself. There are no customer service
items inside the appliance.
Check your kitchen light or other
appliance whether still working on
Check if the cool fan are working, if yes,
need change for a new normal close
thermostat
Set up the temperature
Set up the timer
Check the power box
Change for a new heating element
Change for a new door seal
Change for a new hinge
Put your hand to the outlet and feel if it is
come out for hot air, if yes, it is normal
If the air temperature from the outlet is
room temperature, need change for a
new normal open thermostat
EN
35